K&M - Controlled Depth Reamer Kaizen ELD Match (Extremely Low Drag

ELD Match (Extremely Low Drag Match) bullets are technologically advanced

the Hornady® Neck Turn tool allows for the use of a drill (not included) to make neck turning faster and easier

Bore Tech’s Walnut Shotgun Stix™ feature an ergonomic handle with a robust

Anatomically cut for perfect fit

Removable face-plate for attaching the tubes above

K&M - Controlled Depth Reamer Kaizen ELD Match (Extremely Low DragThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even