WIFI002 - 2 x 16A WIFI relay hub-lorawan Automatic exposure and gain control

Automatic exposure and gain control loop

Exposed solderable ground pad below the driver IC on the bottom of the PCB

waterproof silicone rubber sheath (IP65 protection rating)

Weight: 170 g

Der SP200 ist der erste wirklich freihändige 200Mhz 10:1 Oszilloskop-Tastkopf

WIFI002 - 2 x 16A WIFI relay hub-lorawan Automatic exposure and gain controlThe WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2. 1mm with positive core polarity, DC supplies are required to supply at least 1A at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals. The Relays on